Pulsarlube V
De Pulsarlube V is een eenvoudig te programmeren smeerunit van het gastype met een informatief LCD-scherm.
Ontdek meer over de Pulsarlube V
Product bestellen
Certification
Certified CE, ATEX, UL for use in hazardous areas.
System
8-bit microprocessor controlled to ensure the most accurate dispensing rate.
Easy
Easy to reprogram at any time with a press of a button.
LCD
Easy to program with built-in LCD and simple button controls.
Pulsarlube V Series 125, 250
De automatische vetsmeerunit Pulsarlube V werkt op basis van de bewezen technologie van elektrochemische reactie, waarbij inert stikstofgas (N2) wordt gegenereerd door het systematische gebruik van een elektrolyt en elektrische energie.
Dankzij een microprocessor en LCD-scherm kunnen gebruikers eenvoudig de dosering instellen. De Pulsarlube V regelt de elektrolytische reactie voor een optimale dosering en doseert nauwkeurig een bepaalde hoeveelheid vet op het ingestelde interval, dat geschikt is voor de meeste industriële toepassingen. Dit product is intrinsiek veilig en gecertificeerd als Ex ia llC T4 voor gebruik in gevaarlijke gebieden.
Product dimensies
- V125: Ø97mm(3.83″) x 125mm(4.92″) (H)
- V250: Ø97mm(3.83″) x 163mm(6.42″) (H)
Technische specificaties
Specificatie | Waarde |
---|---|
Grease Pouch Capacity | 125ml/250ml (disposable) |
Gas Type | Electrochemical reaction (Nitrogen gas) |
Operating Pressure | Max. 5bar (73psi)) |
Operating Temperature | -20˚C~55˚C (-4˚F~131˚F) |
Dispensing Periods | 1, 2, 3, 6, 12 month & Purge (P) |
Remote Installation | Max. 1m (3.3ft) with O.D. Ø8 tube |
Multi-Point Installation | N/A |
Packaging | 10 Units/Case |
IP Code | IP68 |
Product Certifications | IECEx, ATEX, KCs, UL, CE, MSHA |
Productcertificaten
Certificaat | Waarde |
---|---|
IP code | IP68 |
ATEX | Ⅱ 1 G / ia Ⅱc T4 |
UL | Cl.Ⅰ, Div. 1, Gps A, B, C, D |
IECEX | ia ⅡC T4 Ga |
KCs | ia ⅡC T4 |
MSHA | Approval No. 18-A180003-0 |
CE / Etc. | CE 0344 |
Snel downloaden
Handleiding in het Engels
Flyer in het Engels
Veiligheidsinformatieblad in het Engels
Accesoires

Reducer, 3/8Part No.: A001

Reducer, 3/8Part No.: A002-S

Reducer, 3/8Part No.: A002

Socket, 1/4Part No.: A011

Socket, 1/8"F x 1/8"F Adaptor (Brass)Part No.: A012

90° Elbow, 1/4"F x 1/4"F Adaptor (Brass)Part No.: A019

90° Elbow, 1/8"F x 1/8"F Adaptor (Brass)Part No.: A020

90° Elbow, 1/4"M x 1/4"F Adaptor (Brass)Part No.: A021

90° Elbow, 1/8"M x 1/8"F Adaptor (Brass)Part No.: A022

45° Elbow, 1/4"M x 1/4"F Adaptor (Brass)Part No.: A023

45° Elbow, 1/8"M x 1/8"F Adaptor (Brass)Part No.: A024

Pipe, 1/8"M x 1/8"M x 50mm for divider block (Steel)Part No.: A106

Pipe, 1/8"M x 1/8"M x 100mm for divider block (Steel)Part No.: A107

Pipe, 1/8"M x 1/8"M x 150mm for divider block (Steel)Part No.: A108

Pipe, 1/8"M x 1/8"M x 200mm for divider block (Steel)Part No.: A109

Pipe, 1/4"M x 1/4"M x 50mm for divider block (Steel)Part No.: A121

Pipe, 1/4"M x 1/4"M x 100mm for divider block (Steel)Part No.: A122

Pipe, 1/4"M x 1/4"M x 150mm for divider block (Steel)Part No.: A123

Pipe, 1/4"M x 1/4"M x 200mm for divider block (Steel)Part No.: A124

Distribution Tubing, O.D. 5/16" (8mm) Urethan Tubing, 3ft Pre-filled with (Grease Type)Part No.: A212-1

Tube Fitting, Push-In Type, PC8-PT1/8"MPart No.: A239

Mounting Bracket, "L" ShapePart No.: B002

Self Drilling Screw, #8 x 20Part No.: B051

WasherPart No.: B057

Thread Converter, PT1/8"F x NPT1/8"M (Brass)Part No.: A243
Toepassingen
Pulp & Paper
- Blowers
- Conveyors
- Pumps
- Electric Motors
- Paper Machines
Cement
- Blowers
- Conveyors
- Pumps
- Electric Motors
- Fans
Directe montage installatie
Reducer
Type | Waarde |
---|---|
A001 | Reducer, 3/8″F X 1/4″M Adaptor (Brass) |
A002 | Reducer, 3/8″F X 1/8″M Adaptor (Brass) |
A003 | Reducer, 3/8″F x 1/8″M Adaptor (Steel) |
45˚ Elbow
Type | Waarde |
---|---|
A023 | 45° Elbow, 1/4”M X 1/4”F Adaptor (Brass) |
A024 | 45° Elbow, 1/8”M X 1/8”F Adaptor (Brass) |
90˚ Elbow
Type | Waarde |
---|---|
A019 | 90° Elbow, 1/4”F X 1/4”F Adaptor (Brass) |
A020 | 90° Elbow, 1/8”F X 1/8”F Adaptor (Brass) |
A021 | 90° Elbow, 1/4”M X 1/4”F Adaptor (Brass) |
A022 | 90° Elbow, 1/8”M X1/8”F Adaptor (Brass) |
Socket + Pipe + Reducer
Type | Waarde |
---|---|
A011 | Socket, 1/4″F x 1/4″F Adaptor (Brass) |
A012 | Socket, 1/8″F x 1/8″F Adaptor (Brass) |
A121 | Pipe,1/4”M X 1/4”M × 50mm (Steel) |
A122 | Pipe,1/4”M X 1/4”M × 100mm (Steel) |
A123 | Pipe,1/4”M X 1/4”M × 150mm (Steel) |
A124 | Pipe,1/4”M X 1/4”M × 200mm (Steel) |
A106 | Pipe, 1/8″M x 1/8″M x 50mm for divider block (Steel) |
A107 | Pipe, 1/8″M x 1/8″M x 150mm for divider Pipe, 1/8″M x 1/8″M x 100mm for divider block (Steel) |
A108 | Pipe, 1/8″M x 1/8″M x 150mm for divider block (Steel) |
A109 | Pipe, 1/8″M x 1/8″M x 200mm for divider block (Steel) |
Single point remote installation
Kit No. 2000RC-1
Type | Waarde |
---|---|
A005 | Reducer, 1/4″F x 1/8″ M Adaptor (Brass) |
B002 | Mounting Bracket, “L”Shape |
B051 | Self Drilling Screw, #8ⅹ20 |
B057 | Washer |
A012 | Socket, 1/8”F x 1/8”F Adaptor (Brass) |
A239 | Tube Fitting, Push-In Type, PC8-PT1/8″M |
A212-1 | Distribution Tubing, O.D. 5/16″(8mm). Urethan Tubing, 3ft Pre-filled with (Grease Type) |
A243 | Thread Converter, PT1/8″F X NPT1/8″M (Brass) |
Note : For remote installation using a tube, use an 8mm O.D. (5/16″) tubing pre-filled with the same or compatible grease as the grease contained in the unit. Recommend using under short dispensing period settings due to powerful dispensing pressure.
Comments