Pulsarlube EX
Het automatische elektromechanische smeerapparaat Pulsarlube EX is UL-/ATEX-gecertificeerd.
Ontdek meer over de Pulsarlube EX
Product bestellen
Atex
Speciaal ontworpen voor omgevingen waar ATEX Klasse I, Divisie II, Groep C & D certificaten vereist zijn.
LCD
Easy to program with built-in LCD and simple button controls.
Service Pack
Substantial savings from the use of replaceable grease pouches and battery packs.
Pulsarlube EX Series 125, 250
Het is in de eerste plaats ontworpen om aan de volgende eisen te voldoen: UL79, elektrische pompen voor aardolie-doserende producten, 8e editie ANSI/ISA-12.12.01-2000, niet-ontvlambare elektrische apparatuur voor gebruik in gevaarlijke locaties (Klasse I, Divisie 2, Groep C en D).
De Pulsarlube EX bestaat uit een verticale zelfaanzuigende pomp, een microprocessorregelsysteem en een groot LCD-scherm. Dit product is ideaal voor toepassingen waarbij een aanzienlijke tegendruk in de smeerolieleiding aanwezig is, een nauwkeurige smering vereist is of een wegwerpsmeerapparaat van het gastype niet economisch is.
De circuits en onderdelen van de Pulsarlube EX zijn ontworpen op basis van het energiebeperkingsconcept. De constructie is dan ook vonkvrij, explosieveilig en voorkomt dat een elektrisch apparaat een explosief gas kan ontsteken, ongeacht of het onder normale of bepaalde abnormale omstandigheden werkt.
Product dimensies
- EX125: Ø91mm(3.60″) x 181mm(7.13″) (H)
- EX250: Ø91mm(3.60″) x 210mm(8.27″) (H)
Technische specificaties
| Specificatie | Waarde |
|---|---|
| Grease Pouch Capacity | 125ml/250ml (replaceable) |
| Power Supply | DC 4.5V Battery Pack |
| Operating Pressure | Max. 15bar (218psi) |
| Operating Temperature | -15˚C~60˚C (5˚F~140˚F) |
| Dispensing Periods | 1, 2, 3, 6, 12 month & H (15 days) |
| Remote Installation | Max. 3m (10ft) with O.D. Ø6 tube (Direct mount is preferable) |
| Multi-Point Installation | N/A |
| Packaging | 10 Units/Case |
| IP Code | IP54 |
| Certifications | ATEX, KCs, UL, CE |
Productcertificaten
| Certificaat | Waarde |
|---|---|
| IP code | IP54 |
| ATEX | Ⅱ 3 G / Ex nL ⅡB T5 |
| UL | Cl.Ⅰ, Div. 2, Gps C, D |
| KCs | Ex nL ⅡB T5 |
| MSHA | Approval No. 18-A180003-0 |
| CE / Etc. | CE (CoC) |
Productcertificaten
| Certificaat | Rating | Maximum Surface Temperature | Enclosure Protection Indices | Classification Of Hazardous Locations | Certificate Number |
|---|---|---|---|---|---|
| UL | Class l Division 2 Groups C.D | T6 (85˚C) | – | Cl l Div2 | E304815 |
| ATEX | Ex nL IIB T5 | T5 (100˚C) | IP54 | Zone2(gas) | LCIE 07 ATEX 6100X |
| KTL | Ex nL IIB T5 | T5 (100˚C) | IP54 | – | 12-KB2BO-0279X |
The Pulsarlube EX is tested and certified by UL (USA), ATEX(Europe), and KTL(Korea), Refer to the above table when Certification for use in Hazardous Locations should be considered.
WARNING
Explosion Hazard – Do not remove or replace batteries unless power has been disconnected or the area is known to be free of ignitable concentrations of flammable gases or vapors.
This equipment is suitable for use in Class I, Division 2, Groups C and D Hazardous Locations OR non-hazardous locations only.
SUBSTITUTION OF MOTOR AND REED SWITCH MAY IMPAIR SUITABILITY FOR DIVISION 2.
| Reference Designation | Description | Type of Protection |
|---|---|---|
| M1 | Motor | Non-incendive Circuit |
| SW4 | Reed Switch | Non-incendive Circuit |
Accesoires
Reducer, 3/8Part No.: A001
Reducer, 3/8Part No.: A002-S
Reducer, 3/8Part No.: A002
Socket, 1/4Part No.: A011
Socket, 1/8"F x 1/8"F Adaptor (Brass)Part No.: A012
90° Elbow, 1/4"F x 1/4"F Adaptor (Brass)Part No.: A019
90° Elbow, 1/8"F x 1/8"F Adaptor (Brass)Part No.: A020
90° Elbow, 1/4"M x 1/4"F Adaptor (Brass)Part No.: A021
90° Elbow, 1/8"M x 1/8"F Adaptor (Brass)Part No.: A022
45° Elbow, 1/4"M x 1/4"F Adaptor (Brass)Part No.: A023
45° Elbow, 1/8"M x 1/8"F Adaptor (Brass)Part No.: A024
Pipe, 1/8"M x 1/8"M x 50mm for divider block (Steel)Part No.: A106
Pipe, 1/8"M x 1/8"M x 100mm for divider block (Steel)Part No.: A107
Pipe, 1/8"M x 1/8"M x 150mm for divider block (Steel)Part No.: A108
Pipe, 1/8"M x 1/8"M x 200mm for divider block (Steel)Part No.: A109
Pipe, 1/4"M x 1/4"M x 50mm for divider block (Steel)Part No.: A121
Pipe, 1/4"M x 1/4"M x 100mm for divider block (Steel)Part No.: A122
Pipe, 1/4"M x 1/4"M x 150mm for divider block (Steel)Part No.: A123
Pipe, 1/4"M x 1/4"M x 200mm for divider block (Steel)Part No.: A124
Distribution Tubing, O.D. 5/16" (8mm) Urethan Tubing, 3ft Pre-filled with (Grease Type)Part No.: A212-1
Tube Fitting, Push-In Type, PC8-PT1/8"MPart No.: A239
Mounting Bracket, "L" ShapePart No.: B002
Self Drilling Screw, #8 x 20Part No.: B051
WasherPart No.: B057
Thread Converter, PT1/8"F x NPT1/8"M (Brass)Part No.: A243
Toepassingen
Power Plant
- Electric Motors
- Pumps
- Air/Gas Compressors
- Fans & Blowers
Thermoelectric Power Plant
- Electric Motors
- Water Pumps
- Conveyer Systems
- Boilers
- Blowers
- Pumps
Directe montage installatie
Reducer
| Type | Waarde |
|---|---|
| A001 | Reducer, 3/8″F X 1/4″M Adaptor (Brass) |
| A002 | Reducer, 3/8″F X 1/8″M Adaptor (Brass) |
| A003 | Reducer, 3/8″F x 1/8″M Adaptor (Steel) |
45˚ Elbow
| Type | Waarde |
|---|---|
| A023 | 45° Elbow, 1/4”M X 1/4”F Adaptor (Brass) |
| A024 | 45° Elbow, 1/8”M X 1/8”F Adaptor (Brass) |
90˚ Elbow
| Type | Waarde |
|---|---|
| A019 | 90° Elbow, 1/4”F X 1/4”F Adaptor (Brass) |
| A020 | 90° Elbow, 1/8”F X 1/8”F Adaptor (Brass) |
| A021 | 90° Elbow, 1/4”M X 1/4”F Adaptor (Brass) |
| A022 | 90° Elbow, 1/8”M X1/8”F Adaptor (Brass) |
Socket + Pipe + Reducer
| Type | Waarde |
|---|---|
| A011 | Socket, 1/4″F x 1/4″F Adaptor (Brass) |
| A012 | Socket, 1/8″F x 1/8″F Adaptor (Brass) |
| A121 | Pipe,1/4”M X 1/4”M × 50mm (Steel) |
| A122 | Pipe,1/4”M X 1/4”M × 100mm (Steel) |
| A123 | Pipe,1/4”M X 1/4”M × 150mm (Steel) |
| A124 | Pipe,1/4”M X 1/4”M × 200mm (Steel) |
| A106 | Pipe, 1/8″M x 1/8″M x 50mm for divider block (Steel) |
| A107 | Pipe, 1/8″M x 1/8″M x 150mm for divider Pipe, 1/8″M x 1/8″M x 100mm for divider block (Steel) |
| A108 | Pipe, 1/8″M x 1/8″M x 150mm for divider block (Steel) |
| A109 | Pipe, 1/8″M x 1/8″M x 200mm for divider block (Steel) |
Single point remote installation
Kit No. 2000RC-1
| Type | Waarde |
|---|---|
| A005 | Reducer, 1/4″F x 1/8″ M Adaptor (Brass) |
| B002 | Mounting Bracket, “L”Shape |
| B051 | Self Drilling Screw, #8ⅹ20 |
| B057 | Washer |
| A012 | Socket, 1/8”F x 1/8”F Adaptor (Brass) |
| A239 | Tube Fitting, Push-In Type, PC8-PT1/8″M |
| A212-1 | Distribution Tubing, O.D. 5/16″(8mm). Urethan Tubing, 3ft Pre-filled with (Grease Type) |
| A243 | Thread Converter, PT1/8″F X NPT1/8″M (Brass) |
Note : For remote installation using a tube, use an 8mm O.D. (5/16″) tubing pre-filled with the same or compatible grease as the grease contained in the unit. Recommend using under short dispensing period settings due to powerful dispensing pressure.
Comments