Pulsarlube S
De Pulsarlube S heeft een uniek en ingenieus ontwerp.
Ontdek meer over de Pulsarlube S
Product bestellen
Design
The upward piston movement reduces oil separation and the possibility of grease hardening
Easy to Refill
Easy to refill grease on site using grease nipple
Control Knob
Grease dispensing rate can be easily controlled by using the control knobs
Pre-Filled
Available pre-filled
Pulsarlube S
De Pulsarlube S is een geavanceerd veertype smeerapparaat dat onderaan een veer bevat en een opwaartse zuigerbeweging heeft. Het probleem van olieafscheiding van traditionele smeerunits van het veertype wordt zo aanzienlijk verminderd.
Technische specificaties
| Specificatie | Waarde |
|---|---|
| Grease Pouch Capacity | 100ml (refillable) |
| Operating Method | Spring |
| Operating Pressure | N/A |
| Operating Temperature | -23℃~121℃ (-9°F~250°F) |
| Dispensing Periods | 5 Dial Settings |
| Remote Installation | N/A |
| Multi-Point Installation | N/A |
| Packaging | 10 Units/Case |
Productcertificaten
| Certificaat | Waarde |
|---|---|
| IP code | N/A |
| Etc. | N/A |
Accesoires
Reducer, 3/8Part No.: A001
Reducer, 3/8Part No.: A002-S
Reducer, 3/8Part No.: A002
Socket, 1/4Part No.: A011
Socket, 1/8"F x 1/8"F Adaptor (Brass)Part No.: A012
90° Elbow, 1/4"F x 1/4"F Adaptor (Brass)Part No.: A019
90° Elbow, 1/8"F x 1/8"F Adaptor (Brass)Part No.: A020
90° Elbow, 1/4"M x 1/4"F Adaptor (Brass)Part No.: A021
90° Elbow, 1/8"M x 1/8"F Adaptor (Brass)Part No.: A022
45° Elbow, 1/4"M x 1/4"F Adaptor (Brass)Part No.: A023
45° Elbow, 1/8"M x 1/8"F Adaptor (Brass)Part No.: A024
Pipe, 1/8"M x 1/8"M x 50mm for divider block (Steel)Part No.: A106
Pipe, 1/8"M x 1/8"M x 100mm for divider block (Steel)Part No.: A107
Pipe, 1/8"M x 1/8"M x 150mm for divider block (Steel)Part No.: A108
Pipe, 1/8"M x 1/8"M x 200mm for divider block (Steel)Part No.: A109
Pipe, 1/4"M x 1/4"M x 50mm for divider block (Steel)Part No.: A121
Pipe, 1/4"M x 1/4"M x 100mm for divider block (Steel)Part No.: A122
Pipe, 1/4"M x 1/4"M x 150mm for divider block (Steel)Part No.: A123
Pipe, 1/4"M x 1/4"M x 200mm for divider block (Steel)Part No.: A124
Distribution Tubing, O.D. 5/16" (8mm) Urethan Tubing, 3ft Pre-filled with (Grease Type)Part No.: A212-1
Tube Fitting, Push-In Type, PC8-PT1/8"MPart No.: A239
Mounting Bracket, "L" ShapePart No.: B002
Self Drilling Screw, #8 x 20Part No.: B051
WasherPart No.: B057
Thread Converter, PT1/8"F x NPT1/8"M (Brass)Part No.: A243
Toepassingen
Fans
- Bearings
- Motors
Directe montage installatie
Reducer
| Type | Waarde |
|---|---|
| A001 | Reducer, 3/8″F X 1/4″M Adaptor (Brass) |
| A002 | Reducer, 3/8″F X 1/8″M Adaptor (Brass) |
| A003 | Reducer, 3/8″F x 1/8″M Adaptor (Steel) |
45˚ Elbow
| Type | Waarde |
|---|---|
| A023 | 45° Elbow, 1/4”M X 1/4”F Adaptor (Brass) |
| A024 | 45° Elbow, 1/8”M X 1/8”F Adaptor (Brass) |
90˚ Elbow
| Type | Waarde |
|---|---|
| A019 | 90° Elbow, 1/4”F X 1/4”F Adaptor (Brass) |
| A020 | 90° Elbow, 1/8”F X 1/8”F Adaptor (Brass) |
| A021 | 90° Elbow, 1/4”M X 1/4”F Adaptor (Brass) |
| A022 | 90° Elbow, 1/8”M X1/8”F Adaptor (Brass) |
Socket + Pipe + Reducer
| Type | Waarde |
|---|---|
| A011 | Socket, 1/4″F x 1/4″F Adaptor (Brass) |
| A012 | Socket, 1/8″F x 1/8″F Adaptor (Brass) |
| A121 | Pipe,1/4”M X 1/4”M × 50mm (Steel) |
| A122 | Pipe,1/4”M X 1/4”M × 100mm (Steel) |
| A123 | Pipe,1/4”M X 1/4”M × 150mm (Steel) |
| A124 | Pipe,1/4”M X 1/4”M × 200mm (Steel) |
| A106 | Pipe, 1/8″M x 1/8″M x 50mm for divider block (Steel) |
| A107 | Pipe, 1/8″M x 1/8″M x 150mm for divider Pipe, 1/8″M x 1/8″M x 100mm for divider block (Steel) |
| A108 | Pipe, 1/8″M x 1/8″M x 150mm for divider block (Steel) |
| A109 | Pipe, 1/8″M x 1/8″M x 200mm for divider block (Steel) |
Comments